[. . . ] Turn the SMALL knob to select the desired option and press ENTER.
Finding Info On A Waypoint
1. Turn the LARGE knob to the desired character and turn the SMALL knob to select characters. [. . . ] Turn the LARGE knob to the desired character and turn the SMALL knob to select characters. Turn LARGE knob to the Create User Wpt By Lat/Lon page and then press ENTER. Use the SMALL to select characters and turn the LARGE knob to move the cursor to set the waypoint name. Continue to select the necessary characters for the Lat/Lon and runway length. Turn the SMALL knob to start inserting waypoints into the flight plan. The destination must be an airport that has an established approach capability.
B. Press FPL twice to reach the home page Flight Plan Mode and press SEL, or press SEL while in the Nav function. Turn the SMALL knob to display the available approach choices.
Verify Approach annunciator is ON Verify/Set OBS/HLD: ON for Procedure Turn or Hold OFF to sequence Verify green Approach-Active annunciator is ON Verify altimeter setting is entered Verify/Set OBS/HLD: OFF to sequence to MAP Verify Approach-Active annunciator is ON (CDI goes to 0. 3 nm full-scale sensitivity) If NOT landing: Press OBS/HLD to cancel Approach-Active (Green Approach-Active annunciator turns OFF) (Approach Annunciator remains ON) (CDI goes to 1. 0 nm full-scale sensitivity) Verify OBS/HLD is ON
GX60 Only
At FAF (MAP Becomes Active) At MAP (TO/FROM Transition)
MAHP Active Waypoint
4. Press NAV to return to Navigation Mode.
DME-Arc Checklist
Location At Arc Intercept Action 1. Follow prompts to turn to next leg
GX60 Only
GX60 Only
On Arc Inbound Leg Intercept
Messages (MSG)
Press MSG
Database (DB)
Press DB
Flight Plan (FPL)
Press FPL
Comm Radio (COM)
Press COM
New
Create WPT by Lat/Lon Create WPT by Radial/Dist Update User Wpt w/PPos Create Wpt by User Grid* Delete User WPT Modify User WPT Delete WPT Comment Access Database
* when enabled
Active FPL
Turn LARGE Knob to change MHz Turn SMALL Knob to change kHz Press <-> to toggle Active & Standby Press MON to monitor Standby Press MEM to memorize Standby Press RCL to recall stored frequencies Turn the LARGE Knob to view frequency types Turn the SMALL Knob to view frequencies for selected type
Turn LARGE Knob
Turn SMALL Knob
Turn SMALL Knob
Old Msg 1 . [. . . ] Turn the SMALL knob to display the available approach choices.
Verify Approach annunciator is ON Verify/Set OBS/HLD: ON for Procedure Turn or Hold OFF to sequence Verify green Approach-Active annunciator is ON Verify altimeter setting is entered Verify/Set OBS/HLD: OFF to sequence to MAP Verify Approach-Active annunciator is ON (CDI goes to 0. 3 nm full-scale sensitivity) If NOT landing: Press OBS/HLD to cancel Approach-Active (Green Approach-Active annunciator turns OFF) (Approach Annunciator remains ON) (CDI goes to 1. 0 nm full-scale sensitivity) Verify OBS/HLD is ON
GX60 Only
At FAF (MAP Becomes Active) At MAP (TO/FROM Transition)
MAHP Active Waypoint
4. Press NAV to return to Navigation Mode.
DME-Arc Checklist
Location At Arc Intercept Action 1. [. . . ]